Instructions:

Ink Away works better on fresh marks. It should be used as soon as possible after the accident has happened.

1. Use a cotton bud to apply a small amount of Ink Away to the ink mark. Take care to use the product only on the stained area.
2. Gently massage the product into the ink mark. DO NOT rub or scrub. Rubbing will cause damage to the leather's finish.
3. Once the product is saturated with ink, clean the area with Leather Soft Cleaner. Remove all traces of the Ink Away.
4. If a mark remains, repeat steps 1-3 until no more ink is removed by the Ink Away (i.e. the cotton bud comes away clean after applying the product). You may not be able to completely remove the mark.
5. Allow the leather to dry for 30 minutes.
6. Apply Leather Protection Cream or Ink Away.

We strongly recommend that you check you leather for colour fastness before applying any product for the first time. This is particularly important when applying products to sensitive leathers such as aniline and nubuck. To do this apply a small amount of the product to a clean, white cloth. Rub the cloth gently on a hidden area of the furniture, check the cloth to see if any colour has transferred. Allow the area to dry for 30 minutes, and check if there are any changes to the colour of the leather. To shorten the drying time, the area can be dried using a hair dryer. Hold the hair dryer at least 30 cm from the leather and dry the area using a slow sweeping motion. Take care not to over-heat or burn the leather. If you notice colour transfer or any visible changes to the leather, do use the product on that piece of furniture. Contact us for more information.

We recommend using a spray bottle to apply mould killer to fabric.